All returns are subject to a 30% restocking fee, no refunds on shipping.
All returns must be made immediately after receipt of item in original undamaged packaging.
Damage or use to detector or accessory incur additional deductions.
SUN RAY INVADER™ DX-1 TARGET PROBE
(Compatible with White's DFX & MXT)
Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for White's metal detectors! The new Sun Ray Invader DX-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of DFX/MXT users. We have received many requests for in-line target probes by White's and other detector brand users for several years due to the popularity of our quality in-line probes for the Minelab Explorer and Sovereign/Elite. Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the DX-1:
Fully compatible with both DFX and MXT models! The DX-1 is precision built to ensure peak performance on either model!
Accurate "Bullseye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft (which has been very popular among Explorer users). DX-1 probe and cable weigh approx. 6 oz. DX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing).
While the DX-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.) DX-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID along with identical pinpoint functions!
High quality custom made, durable partially coiled probe and connector cable used with identical specifications as White's cable for precision performance!
Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
DX-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
No extra batteries required as the DX-1 utilizes the detectors power source.
FULL 12 MONTH WARRANTY!!