|

Minelab's Multiple Frequency Full Band Spectrum
(FBS) technology is the only technology in the world that provides
the serious treasure hunter with both deep detection and deep
precision discrimination, regardless of ground conditions and
target type.
Serious detectorists understand that every outing
is a unique moment in time that needs to be enjoyed and maximised.
Minelab's Explorer Professional detector will handle varying conditions
with maximum results!
Explorer's FBS technology automatically transmits28
multiple frequencies simultaneously from 1.5kHz to 100kHz.
The lower the frequency used by a detector, the
deeper it can penetrate. At low frequencies however, the sensitivity
to small targets is sometimes reduced. The higher the frequency,
the higher the sensitivity to small targets, but higher frequencies
will not penetrate the ground as deeply. The increased frequency
range of the Explorer SE Professional means more sensitive and
accurate target identification at greater depths.
FBS technology also improves the detector's ability
to cancel ground mineralisation. Ground Balancing is automatic,
so whatever the field conditions, the Explorer Professional maximises
depth, sensitivity and discrimination.
Features:
* 28 Frequency Full Band Spectrum (FBS)
technology
* New lightweight, perfectly balanced waterproof ultra-light &
ultra-tough 11" DD coil
* NiMH battery pack or 8 x AA Alkaline batteries for long battery
life.
* 3rd generation software with faster & more powerful microprocessor
* Full function advanced programming
* Unique dual coordinate target profiling with patented Smartfind
* Full ferrous Iron Mask discrimination
* Easy learning curve with Quickstart Mode
* Intuitive user interface with large, easy to read target coordinates
* Fine sensitivity, threshold and volume adjust controls
* 2 yr..warranty
Look at these Improved Features
- New faster and more powerful microprocessor with improved
power consumption makes the Explorer SE more responsive. Spend
more time detecting; less time programming and recharging.
- New menu structure giving easier access to key functions
makes Explorer SE programming a breeze. Fast learning curve;
intuitive, easy to learn user interface.
- New audio modulated pinpoint mode making target size
and depth identification more reliable. Save valuable time
recovering targets.
- Simplified Iron Mask coordinates 0-31 with full ferrous
discrimination capability. Easy correlation of Iron Mask settings
with digital read-out values; more user friendly function;
Simplifies use of Iron Mask; make better use of Iron Mask
function.
- New audio tone settings with new Pitch Hold mode for
picking up even the faintest of target signals. Improve recovery
rate for the smallest or deepest of good targets.
- New Quickstart settings make the learning curve on the
Explorer SE a more rewarding one.
- New finer threshold and volume adjust controls. Fine
tune Threshold and Volume to perfectly match operating conditions.
More accurate and comfortable settings.
- Improved Threshold stability in noisy / trashy environment.
Less false signals; cover more ground faster.
- Larger target coordinates in Digital screen and improved
menu fonts.
- Improved weight and balance with new light-weight waterproof
coil; Comfortable detect for longer periods of time without
fatigue.
| Features |
| Transmission Technology |
Full Band Spectrum (FBS) 28 Simultaneous
Frequencies ranging from 1.5kHz - 100 kHz |
| Number of Frequencies |
28 Simultaneous Frequencies |
| Microprocessor |
New technology processor - faster
and more powerful |
| Software |
3rd Generation Software - improved
user interface |
| Ground Balance Modes |
Auto Ground Compensation - Advanced
Digital Filtering |
| Target Identification |
2 Dimensional Smartfind™
Size / Conductivity and Ferrous characteristics |
| Audio Tone Identification |
Constant to Multi-tone; customizable
Conductivity / Ferrous |
| Audio Tone Settings |
3 Settings: Long, Smooth, Pitch
Hold |
| Discrimination |
2 Dimensional Smartfind™
Discrimination |
| Iron Mask |
Simplified Iron Mask coordinates
0-31 with full ferrous discrimination capability |
| Depth Indicator |
Yes; Now also updates in pinpoint
mode |
| Sensitivity Adjustment |
2 Settings: Semi-Automatic &
Manual 1-32 |
| Noise Cancel |
Automatic & Manual |
| Pinpoint |
Non-motion modulated audio for
improved target size and depth identification |
| Low Battery Audio Alarm |
Yes |
| Batteries |
1600 mAh NiMH or Alkaline batteries |
| Coil |
Ultra-lightweight 11" Double
D (DD) waterproof coil |
| Visual Display |
64x128 pixel LCD panel with improved
graphics |
| Headphone Input |
0.25 inch Stereo Jack |
| Threshold |
Finer adjust level; improved
stability in high-trash |
| Recovery Speed |
Selectable (Fast & Deep) |
| Patents |
US 4890064; US 5537041; US 5506506 |
| Optional Accessories |
| Coils |
8" FBS Coil with
Lower Shaft |
| Battery |
1800mA/H NiMH
Battery Pack; 'AA' Housing Battery Pack |
| Charger |
12V Car Charger |
|