Introducing the Totally NEW Concept in Metal Detector Probes!
The first compact, lightweight all-in-one metal detector headphone, highly
sensitive ground probe and Pulse Inductance Metal Detector built inside
the headphone earcups!
Pulse Frequency, Threshold,
Compatibility; Probe On/Off.
Connectors: Left cable for
headphone connection to your detector. Right cable for probe
searchcoil or optional 8" or 11" DetectorPro PI
|You are looking at
a value-added industry first from DetectorPro! The first compact all-in-one
probe/headphone/pulse inductance metal detector in the
world famous DetectorPro design. UniProbe is a new
high-powered pulse inductance probe that can be switched on or off
during hunting and retrieval with your metal detector... Or it can be used just as a
set of high-quality detector headphones... Or with an optional PI searchcoil and
rods, it can be turned into a complete PI metal detector! Not only does this
probe contain today's
most innovative Pulse Inductance electronics, it is the first probe that has all the electronics built
into the headphones. All of this is possible because of our innovative
microcircuitry and packaging. The UniProbe has been engineered to perform in
all ground minerals and on both salt
and fresh water beaches too with up
to 5-6" depth on coins
in the retrieval hole. UniProbe is a
true universal application probe/ metal detector and will open up a whole new world of
accurate retrieval for you. Too many valuable coins, relics and
jewelry are damaged everyday by the detectorist's inability to
accurately pinpoint with large searchcoils. Isn't it about time you
stopped damaging your treasures?
1/4" coiled headphone cable with molded plug and locking
- Operating Search Frequency:
- Searchcoil: 8"
x 5/8" diameter probe.
- Probe Depth: Up
to 5-6" deep on coins in the hole.
- Headphone Transducers:
designed for maximum sensitivity efficiency, durability
and signal quality.
- Audio Frequency: Pulse
- Headphone Earcups: Heavy-duty
polymer full ear surround; extra comfortable soft cushions, ambient
noise blocking up to 23 decibels.
- Headphone Frame: Adjustable
padded headband, no screws, no wire frame, no rust, compact carry foldable design.
- Controls: Full range
"stay put" volume with segmented "click"
positioning; continuous adjust Threshold and Frequency.
- Switches: All
Detector Compatibility; Probe "On/Off"
- Search Mode: Threshold
- Operating environments: 8"
Probe is waterproof for land, salt
& fresh water beach use; Headphones are not waterproof.
- Cables: 1/4"
heavy-duty removable coil cords for probe and headphone with
- Rods: Optional
for conversion to Pulse detector
Optional DetectorPro 8" or 11" PI
- Breakdown: Compact
fold and carry, removable cords with high-quality connectors.
- Battery: (1) 9-Volt
Alkaline battery (supplied).
- Battery Life: Dependent
on the on/off cycling during use, rated currently up to 12 hours
(alkaline) continuous "on" use.
- Applications: Jewelry, relic,
and coin hunting.
- Warranty: Two
- NOTE: Specifications
and features subject to change without notice.